القطيفة Lover

أهلا وسهلا بك أخي الكريم أختي الكريمة اذا لم تسجل بعد بالمنتدى يمكنك التسجيل

انضم إلى المنتدى ، فالأمر سريع وسهل

القطيفة Lover

أهلا وسهلا بك أخي الكريم أختي الكريمة اذا لم تسجل بعد بالمنتدى يمكنك التسجيل

القطيفة Lover

هل تريد التفاعل مع هذه المساهمة؟ كل ما عليك هو إنشاء حساب جديد ببضع خطوات أو تسجيل الدخول للمتابعة.
القطيفة Lover

2 مشترك

    كودات وأسرار الموبايل

    Administrator
    Administrator
    Admin


    عدد المساهمات : 569
    نقاط : 101592
    ضع تقييمك للمنتدى : 14
    تاريخ التسجيل : 13/01/2010
    العمر : 30
    الموقع : قلب أمي .....

    كودات وأسرار الموبايل Empty كودات وأسرار الموبايل

    مُساهمة  Administrator الخميس فبراير 04, 2010 10:29 pm

    كودات وأسرار

    أسرار وخفايا نوكيا

    1610 , 1611 , 2010 , 3210 , 3310 . 3810 , 5110 , 6080 , 6081 , 6120 , 6160 , 6162 , 6150 , 6190 , 7110 , 8850



    اولا:البطارية:
    #3370 * لزيادة في استهلاك البطارية .
    #3370# لتقليل نسبة استهلاك البطارية .
    مع العلم انك اذا قللت استهلاك البطارية يضعف الارسال......!!
    واذا زودت استهلاك البطارية يقوى الارسال يعني انصحك انك ما تغير وضعك الحالي....!!
    --------------------
    ثانيا:بيانات الجهاز:
    #92702689# * تعطيك بينات كاملة عن الجهاز .
    #0000#* لرؤية برنامج الجهاز وتاريخ برمجته .
    #06#* لرؤية السيريال نمبر حق جهازك انت ووجهك .
    -------------------
    ثالثا:التحويل:
    لتحويل جميع المكالمات :
    To Activate: * * 21 * NUMBER # SEND متاح .
    To Cancel: # # 21 # SEND الغاء .
    To Check: * # 21 # SEND تشييك .
    -------------------
    لتحويل المكالمات عند الانشغال :
    To Activate: * * 67 * NUMBER # SEND متاح
    To Cancel: # # 67 # SEND الغاء .
    To Check: * # 67 # SEND تشييك (متابعة ) .
    To Cancel All Call Forwarding # # 002 # SEND الغاء الجميع.
    ------------------
    تحويل المكالمات عند عدم الرد :
    To Activate: * * 61 * NUMBER # SEND متاح .
    To Cancel: # # 61 # SEND الغاء .
    To Check: * # 61 # SEND تشييك .
    ------------------
    رابعا:الانتظار:
    لتشغيل وظيفة الانتظار :
    To Activate: * 43 # SEND تشغيل .
    To Deactivate: # 43 # SEND الغاء .
    To Check: * # 43 # SEND تشييك .
    ------------------
    خامسا:القفل:
    قبل كل شي لازم تعرف تكتب هالحروف:
    p اظغط على النجمة ( * ) ثلاث مرات .
    اظغط على النجمة ( * ) اربع مرات .
    اظغط +على النجمة ( * ) مرتين .

    #pw+12234567890+1 # تعطي حالة قفل مجهز GIVES PROVIDER-LOCK STATUS .

    #pw+12234567890+2 # تعطي حالة قفل شبكة GIVES NETWORK-LOCK STATUS .

    #pw+12234567890+3 # تعطي حالة قفل بلد GIVES COUNTRY-LOCK STATUS .

    #pw+12234567890+4 # تعطي حالة قفل البطاقة GIVES SIM-CARD-LOCK STATUS .

    ------------------
    سادسا:كود تشغيل اكسسوارات السيارة:
    #746025625# * ( #SIM0CLOCK#* )
    ------------------
    سابعا:تشغيل الرادار:
    1-اختر(القائمة).
    2-اختر(الضبط).
    3-اختر (ضبط الحماية).
    4-اختر (المجموعة المحددة) .
    5-اختر (تعمل) .
    6-بعدين يبي يسألك عن رقم المجموعة دخل اربعة اصفار بس 0000 .
    7-اختر (موافق).
    بعدين خلاص تصير شغلت كاشف الرادار.............!!
    بس ترا الجوال ما يكشف الرادار الا على بعد كيلو واحد بس...................!!

    ========================= =========================


    ========================

    نوكيا 3310
    معرفة IMEI
    لمعرفة رقم IMEI
    * # 06 #
    سيخرج لك الرقم

    لمعرفة الاصدار
    هذا الرمز سيخرج لك اصدار جوالك وتاريخ الصنع
    * # 3110 #
    ------------------
    لمشاهدة الضمان

    هذا الرمز يساعدك على معرفة الضمان الخاص بجهازك
    *#92702689# (= *#war0anty#).

    سيطلب منك رمز الضمان قم بادخال الرموز التالية :
    6232 لمعرفة سنة وشهر الصنع .
    7332 لمعرفة اخر مرة تم تصليح الجهاز.
    7832 ليظهر لو فعلا سبق وان تم تصفير الجهاز.
    9268 لاظهار السيريل نمبر حق الجهاز.
    37832 لظبط تاريخ التصنيع ولكن احذر تستطيع عمل ذلك مرة واحدة فقط .
    87267 لتأكيد التحويل .

    معلومات غلق ساعة البطاقة

    للتأكد من امكانية اغلاق ساعة البطاقة
    *#746025625# (= *#sim0clock#)
    -----------------
    اعادة ضبط المصنع
    اضغط التالي ولكن هذا الرمز لايشمل الذاكرة واللغة والعدادات
    *#7780#
    -----------------
    حالة الغلق

    لتعرف حالة غلق جوالك اضغط
    # pw + 1234567890 + [y] #
    كما تستطيع معرفة حالة الاقفال بالتالي
    # pw + [mastercode] + [y] #
    ولاحظ
    حرف y يعني الاقفال من 1 الى 4
    أي عشرة ارقام خلاف هذه قد تعمل على فك الاقفال 1234567890"

    وهذه طريقة لمحاولة فك الاقفال بدون ان تعرف الكود الاصلي للفك
    حاول فلن تخسر شيئا
    في البداية لازم البين كود يكون مفتوح بعدين C اضغط حرف
    سهم لأسفل
    C اضغط على السي حتى تخلو الشاشة
    اضغط على النجمه حتى تبدأتؤشر ثم اعمل الاتي

    04***your pin>#
    وفي كل مرة تقفل جوالك تعيد الضبط

    =========================
    * نوكيا 3210 *
    معرفة IMEI
    لمعرفة رقم IMEI
    * # 06 #
    سيخرج لك الرقم


    شفرات نص السعر

    هذا الرمز يزيد البطارية بنسبة 30% وينقص من صفاء الصوت
    هذا رمز التشغيل# * 4720
    وهذ رمز لايقافه# # 4720
    معلومات غلق الساعة
    لتشييك ان كان يمكن غلق الساعة
    *#746025625# (= *#sim0clock#)
    حالة غلق الاقفال
    لتستعلم عن حالة الاقفال
    # pw + 1234567890 + [y] #
    لو كنت تعرف العشرة ارقام الخاصة بكرتك فتستطيع استخدام التالي
    # pw + [mastercode] + [y] #
    ولاحظ
    حرف y يعني الاقفال من 1 الى 4
    ويبدو ان أي عشرة ارقام غير هذه تعمل "1234567890"

    =========================


    * نوكيا 5510 *
    معرفة IMEI
    لمعرفة رقم IMEI
    * # 06 #
    سيخرج لك الرقم
    لمعرفة الاصدار
    هذا الرمز سيخرج لك اصدار جوالك وتاريخ الصنع
    * # 0000 #
    قائمة الخدمات
    للحصول على معلومات عن جهازك اكتب التالي
    *#92702689# (= *#war0anty#).
    ستجد قائمة الخدمات
    1 IMEI (International Mobile Equipment Identification)
    2 تاريخ التصنيع
    3 تستطيع هنا ادخال تاريخ الشراء.
    لو دخلته غير صحيح ماتقدر تصححه بعدين
    4 تاريخ التصليح لو كان سبق تصليحه
    5 تحويل معلومات المستخدم
    اكواد الطاقة الكاملة
    *3370# يزيد في الطاقة ويعمل بعد ماتحط الرمز وتطفي الجوال وتشغله

    #3370# لتقفيل الخدمة السابقة ويحتاج ايضا للاقفال والتشغيل.
    اكواد نص الطاقة
    *4720# يزيد في الطاقة ويعمل بعد ماتحط الرمز وتطفي الجوال وتشغله ( وهو جيد لحالة الانتظار
    #4720# لتقفيل الخدمة السابقة ويحتاج ايضا للاقفال والتشغيل
    قائمة الانماط
    لو ضغطت زر التشغيل شوي بتطلع لك القائمة على طول ولو طولت في الضغط طفى .


    فتح الاقفال
    وهذه طريقة لمحاولة فك الاقفال بدون ان تعرف الكود الاصلي للفك
    حاول فلن تخسر شيئا
    في البداية لازم البين كود يكون مفتوح بعدين اضغط حرف C
    سهم لأسفل
    C اضغط على السي حتى تخلو الشاشة
    اضغط على النجمه حتى تبدأتؤشر ثم اعمل الاتي

    04***your pin>#
    وفي كل مرة تقفل جوالك يبي لك تعيد الضبط
    وعلى العموم هو احسن من لاشيء


    ========================= ===

    * نوكيا 6110 و 6150 *
    معرفة IMEI
    لمعرفة رقم IMEI
    * # 06 #
    سيخرج لك الرقم
    لمعرفة الاصدار
    هذا الرمز سيخرج لك اصدار جوالك وتاريخ الصنع
    * # 0000 #
    ولو مانفع جرب هذا
    * # 6110 #
    قائمة الخدمات
    للحصول على معلومات عن جهازك اكتب التالي
    *#92702689# (= *#war0anty#).
    ستجد قائمة الخدمات
    واذا لم تظهر القائمة جرب الرموز التالية
    6232 تاريخ وسنة الصنع .
    7332 تاريخ التصليح .
    7832 لمعرفة تاريخ شراء الجهاز ان كان مستعمل .
    9268 لاظهار الرقم التسلسلي.
    37832 لتثبيت تاريخ الشراء ولكن لاحظ انك تسويه مرة وحدة بس
    87267 لتاكيد التحويل
    اكواد الطاقة الكاملة
    *3370# يزيد في الطاقة ويعمل بعد ماتحط الرمز وتطفي الجوال وتشغله

    #3370# لتقفيل الخدمة السابقة ويحتاج ايضا للاقفال والتشغيل..
    قائمة الانماط
    لو ضغطت زر التشغيل شوي بتطلع لك القائمة على طول ولو طولت في الضغط طفى .


    =======================

    * نوكيا 8210 و 8810 *
    معرفة IMEI
    لمعرفة رقم IMEI
    * # 06 #
    سيخرج لك الرقم
    لمعرفة الاصدار
    هذا الرمز سيخرج لك اصدار جوالك وتاريخ الصنع
    * # 8110 #


    قائمة الخدمات
    للحصول على معلومات عن جهازك اكتب التالي
    *#92702689# (= *#war0anty#).
    ستجد قائمة الخدمات
    واذا لم تظهر القائمة جرب الرموز التالية
    6232 تاريخ وسنة الصنع.
    7332 تاريخ التصليح .
    7832 لمعرفة تاريخ الشراء.
    9268 لمعرفة رقم السيريال.
    37832 لوضع تاريخ الشراء ولاحظ انه يوضع مرة وحدة بس
    87267 لتاكيد التحويل
    معلومات غلق الساعة للبطاقة
    *#746025625# (= *#sim0clock#)



    فتح الاقفال
    وهذه طريقة لمحاولة فك الاقفال بدون ان تعرف الكود الاصلي للفك
    حاول فلن تخسر شيئا
    في البداية لازم البين كود يكون مفتوح بعدين اضغط حرف C
    سهم لأسفل
    C اضغط على السي حتى تخلو الشاشة
    اضغط على النجمه حتى تبدأتؤشر ثم اعمل الاتي

    04***your pin>#
    وفي كل مرة تقفل جوالك يبي لك تعيد الضبط
    وعلى العموم هو احسن من لاشيء

    =========================

    * نوكيا 8810 *
    معرفة IMEI
    لمعرفة رقم IMEI
    * # 06 #
    سيخرج لك الرقم
    لمعرفة الاصدار
    هذا الرمز سيخرج لك اصدار جوالك وتاريخ الصنع
    * # 0000 #
    قائمة الخدمات
    للحصول على معلومات عن جهازك اكتب التالي
    *#92702689# (= *#war0anty#).

    ستحصل على التالي
    رقم التسلسلي
    تاريخ التصنيع
    تاريخ الشراء ان كان مدخل
    تاريخ التصليح
    تحويل معلومات المستخدم
    معلومات غلق الساعة للبطاقة
    *#746025625# (= *#sim0clock#)


    ========================


    * نوكيا 9000 *
    معرفة IMEI
    لمعرفة رقم IMEI
    * # 06 #
    سيخرج لك الرقم
    لمعرفة الاصدار
    هذا الرمز سيخرج لك اصدار جوالك وتاريخ الصنع
    *#682371158412125#
    تاريخ التصنيع
    *#3283# (or *#DATE#)




    كودات وأسرار

    أسرار وخفايا أريكسون

    انواع الأجهزه التي يمكنك تطبيق الكودات بها هي :ـ


    All the Ericsson phones with exception a part about the T28


    * # 0 6 # IMEI number (phone serial no.)

    Must be the same number on the sticker inside your phone, if not your phone may have been cloned All Ericsson Phones.

    * # 0 0 0 0 #

    Reset language to English (useful when itchy hands changed your phone's language to some other alien form All Ericsson Phones.

    > * < < * < *

    Service Menu - tells you the phone's software version (good for checking your phone's "age" before buying it); press "Yes" repeatedly to see all the software data & press ">" to see all the texts available in your phone (hundreds of them!); some phones have "Flash?" option to reset the phone (I didn't see any difference after doing that) All Ericsson Phones.

    Ericsson T28 Secrets

    >*<<*<*

    Check the firmware revision information (software release)

    >*<<*<*>

    1-row text strings. Pressing yes you can check the phones text programming in currently selected language.

    >*<<*<*>>

    n-row text strings. Pressing yes you can check the phones text programming in currently selected language.



    كودات وأسرار

    أسرار وخفايا موتورلا

    اسرار لجوالات موتورلا للموديلات التالية: d460, 6200, 7500, 8200, 8400, 8700, V3688, CD160, CD520, 920 and 930.


    Motorola d460

    *#06# for checking the IMEI (International Mobile Equipment Identity)

    Activate RBS

    (Note: pause means the * key held in until box appears) To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok] You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.

    De-activate RBS

    To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok] This only works with some versions of software.

    What's the use of RBS:

    Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.

    Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.

    Motorola 6200

    Activate RBS

    (Note: pause means the * key held in until box appears) To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok] You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.

    De-activate RBS

    To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok] This only works with some versions of software.

    These countries has been reported working:

    UK (Orange)
    AU

    What's the use of RBS:

    Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.

    Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.

    Pin Outs

    Numbered left to right, keypad up, battery down

    1. Audio Ground
    2. V+
    3. True data (TD) (input)
    4. Downlink - Complimentary data (CD) (input)
    5. Uplink - Return data (RD) (output)
    6. GND
    7. Audio Out - on/off
    8. Audio In
    9. Manual Test - ???
    10. Battery Feedback
    11. Antenna connector

    Motorola 7500

    Activate RBS

    (Note: pause means the * key held in until box appears) To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok] You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.

    De-activate RBS

    To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok] This only works with some versions of software.

    These countries has been reported working:

    IT (model: F16 HW: 5.2 SW: 2.1)

    What's the use of RBS:

    Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.

    Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.

    Pin Outs

    Numbered right to left, keypad up, battery down looking

    1. Gnd
    2. Pos
    3. True data (TD) (input)
    4. Complimentary data (CD) (input)
    5. Return data (RD) (output)
    6. Audio gnd
    7. Audio out
    8. Audio in

    Motorola 8200

    Activate RBS

    (Note: pause means the * key held in until box appears) To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok] You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.

    De-activate RBS

    To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok] This only works with some versions of software.

    These countries has been reported working:

    ES, AU, NL, BE

    What's the use of RBS:

    Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.

    Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.

    Pin Outs

    Numbered right to left, keypad up, battery down looking

    1. Audio Ground
    2. V+
    3. True data (TD) (input)
    4. Downlink - Complimentary data (CD) (input)
    5. Uplink - Return data (RD) (output)
    6. GND
    7. Audio Out - on/off
    8. Audio In
    9. Manual Test - ???
    10. Battery Feedback
    11. Antenna connector

    Motorola 8400

    Activate RBS

    (Note: pause means the * key held in until box appears)To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok] You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.

    De-activate RBS

    To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok] This only works with some versions of software.

    These countries has been reported working:

    IT, NL

    What's the use of RBS:

    Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.

    Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.

    Pin Outs

    Numbered left to right, keypad up, battery down

    1. Audio Ground
    2. V+
    3. True data (TD) (input)
    4. Downlink - Complimentary data (CD) (input)
    5. Uplink - Return data (RD) (output)
    6. GND
    7. Audio Out - on/off
    8. Audio In
    9. Manual Test - ???
    10. Battery Feedback
    11. Antenna connector

    Motorola 8700

    #06# for checking the IMEI (International Mobile Equipment Identity)

    Activate RBS

    (Note: pause means the * key held in until box appears) To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok] You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.

    De-activate RBS

    To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok] This only works with some versions of software.

    These countries has been reported working:

    AU, IT, SG, DE, ES, ZA

    What's the use of RBS:

    Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.

    Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.

    Motorola V3688

    *#06# for checking the IMEI (International Mobile Equipment Identity)

    Enhanced Full Rate Codec (EFR):

    To Enable EFR press [][][] 119 [] 1 [] OK.
    To Disable EFR press [][][] 119 [] 0 [] OK

    NOTE: Nothing appears on Screen.

    Other Phones from Motorola (CD 160, CD 520, 920, 930)

    Motorola CD 160

    Press menu and type one of these numbers and press OK:

    11 = Status Review
    13 = Available Networks
    14 = Preferred Networks
    22 = Select Keypad Tones
    25 = Require SIM Card PIN
    26 = Language Selection
    32 = Repetitive Timer
    33 = Single Alert Timer
    34 = Set IN-Call Display
    35 = Show Call Timers
    36 = Show Call Charges
    37 = Call Charge Settings
    38 = Reset All Timers
    43 = Reset All Timers
    45 = Show Last Call
    46 = Total For All Calls
    47 = Lifetime Timer
    51 = Change Unlock Code
    52 = Master Reset
    53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
    54 = New Security Code
    55 = Automatic Lock
    63 = Battery Saving Mode


    Free call tip

    1. Enter the phone number
    2. Enter OK
    3. Type *#06#
    4. Press Button C
    5. And finally press the button for power off.

    You should now be able to talk without being billed.

    Motorola CD 520

    Free call tip

    1. Enter the phone number
    2. Enter OK
    3. Type *#06#
    4. Press Button C
    5. And finally press the button for power off.

    You should now be able to talk without being billed.

    Motorola 920/930

    The 54# Tip:

    Type 1#, 2#........54# on the keypad (when you're not in the menu) to get the phone number used for with this key when speed dialing.

    Keyboard lock

    if you push * and # on the same time your keyboard locked. When you press it again, you unlock your keyboard.

    Supplementary Menu

    If your Motorola CD920 or 930 has the engineering software, you can get an engineering mode by typing : ***113*1*, but you have to maintain each * during 3 sec to get a square. So 3 squares, 113, 1 square, 1, 1 square, CALL. If the software is present you have one supplementary menu. To remove it typ ***113*0* like above.

    To put the counter to 0 even global counter, just do a reset factory in the Config menu.



    كودات وأسرار

    أسرار وخفايا سمنس

    هذه هي الموديلات التي يمكنك تطبيق الكودات والأسرار بها وهي :ـ


    S1, S3 / S3 Comfort, S4 / S4 Power, C25, S25, M35, S35, C35.


    Siemens S1

    Secret Codes

    SP unlock *#0003*(secret code 8 digits)#

    *#06# for checking the IMEI (International Mobile Equipment Identity)

    Tetris

    Power on phone and enter PIN. before phone has locked onto network, F9, send own number, hit right button, hit 9. left is 2, right is 8, rotate is 5, and drop is 4.

    Monitor Mode

    1. Menu
    2. 9 (Phone Options)
    3. 7 (Phone Status)
    4. Left Display Button (left MENU key)
    5. 5553756
    6. HangUp Button (Red HandSet key)


    Now "Monitor" should appear at the bottom of the Network Options menu. Pressing the right Display Button when in monitor mode will show a list of the six cells with the strongest signals. Test Mode Indicators: (* = only available when call in progress )

    CH Channel Number
    RX Signal Strength (dB)
    N NCC (Color Code)
    B BCC (Color Code)
    CI Cell ID (in Hex)
    C1+ how long before phone does forced hand over. (see RX and RXAM)
    LAI Location Area Identity. Display Network ID code (42F010 = 240.01) and MSC
    TXPWR Transmit Power (dB)
    RXAM Reeceive signal strength cut-off point
    TS* Time Slot Number
    TA* Timing Advance. Distance from tower in Km * 2
    PL* Power Level

    Power Table

    PL: 5 6 7 8 9 10 11 12 13 14 15
    dB: 33 31 29 27 25 23 21 19 17 15 13
    Watts: 2 1.3 .8 .5 .3 .2 .13 .08 .05 .03 .02
    LF* C1 value with continuous transmisson from tower
    LS* C1 Value with discontinuous tranmission from tower
    QF* Bit Error Rate with continuous transmission from tower
    QS* Bit Error Rate with discontinuous transmission from tower
    BER (bit error rate) table
    QF/QS register: 0 1 2 3 4 5 6 7
    % of bit sent: 0.2 0.8 0.4 1.6 3.2 6.4 12.8 25.6

    Tips and tricks

    Nice Sunset in the display. Siemens S3 or younger In the Telephone Book in the section own numbers, first position you have to type in +12022243121 (Number of the Capitol in Washington DC) and save it without a name. Then open this telephone book again do so as you like to change the number but leave the modus without changing anything. A nice Sundown will be shown in the display.

    Pin Out

    1- GND
    2- SB
    3- POWER
    4- NC
    5- TX
    6- RX
    7- CLOCK
    8- DATA
    9- GND MIC
    10- HF MIC
    11- AUDIO
    12- GND AUDIO

    Siemens S3 / S3 comfort

    Secret Codes

    SP unlock *#0003*(secret code 8 digits)

    #*#06# for checking the IMEI (International Mobile Equipment Identity)

    Tetris

    Power on phone and enter PIN. before phone has locked onto network, F9, send own number, hit right button, hit 9. left is 2, right is 8, rotate is 5, and drop is 4.

    Monitor Mode

    1. Menu
    2. 9 (Phone Options)
    3. 7 (Phone Status)
    4. Left Display Button (left MENU key)
    5. 5553756
    6. HangUp Button (Red HandSet key)


    Now "Monitor" should appear at the bottom of the Network Options menu. Pressing the right Display Button when in monitor mode will show a list of the six cells with the strongest signals. Test Mode Indicators: (* = only available when call in progress )

    CH Channel Number
    RX Signal Strength (dB)
    N NCC (Color Code)
    B BCC (Color Code)
    CI Cell ID (in Hex)
    C1+ how long before phone does forced hand over. (see RX and RXAM)
    LAI Location Area Identity. Display Network ID code (42F010 = 240.01) and MSC
    TXPWR Transmit Power (dB)
    RXAM Reeceive signal strength cut-off point
    TS* Time Slot Number
    TA* Timing Advance. Distance from tower in Km * 2
    PL* Power Level

    Power Table

    PL: 5 6 7 8 9 10 11 12 13 14 15
    dB: 33 31 29 27 25 23 21 19 17 15 13
    Watts: 2 1.3 .8 .5 .3 .2 .13 .08 .05 .03 .02
    LF* C1 value with continuous transmisson from tower
    LS* C1 Value with discontinuous tranmission from tower
    QF* Bit Error Rate with continuous transmission from tower
    QS* Bit Error Rate with discontinuous transmission from tower
    BER (bit error rate) table
    QF/QS register: 0 1 2 3 4 5 6 7
    % of bit sent: 0.2 0.8 0.4 1.6 3.2 6.4 12.8 25.6


    Unlock Siemens S3(Not S3 COM)
    (For advanced users only)

    At addresses 0D8 to 0DD the phones code is stored. To read the code swap nibbles stored at addresses from 0DA to 0DD. Error counter is at 0D9. To clear the Phone Code write at addresses from 0D8 to 0DD: 00, 00, FF, FF, FF, FF.

    Siemens S3 comfort

    Show IMEI code: * # 06 #

    MONITOR MODE

    The Siemens S3 Com series have a Monitor mode that can be activated directly from the standard user keypad. In order to activate this mode, you must enter the special access code currently programmed into the phone.

    TO ACTIVATE MONITOR MODE

    1. Turn the phone on.
    2. Enter the PIN access code on press OK. (Only if is enabled).
    3. Press Menu. (Left top button).
    4. Press 9. (Phone Options).
    5. Press 8. (Phone Status) (May be button 7 in some phones).
    6. You may see your IMEI Number
    7. Left Display Button (Top left MENU key).
    8. 7684666
    9. HangUp Button. (Red HandSet key). Note: Monitor should appear now at the bottom of the Network Options menu.


    MONITOR MODE TOGGLE
    Pressing the right Display Button when in monitor mode will toggle into 1 and 2 modes

    Tips and tricks

    Nice Sunset in the display. Siemens S3 or younger

    In the Telephone Book in the section own numbers, first position you have to type in +12022243121 (Number of the Capitol in Washington DC) and save it without a name. Then open this telephone book again do so as you like to change the number but leave the modus without changing anything. A nice Sundown will be shown in the display.

    Pin Out

    1- GND
    2- SB
    3- POWER
    4- NC
    5- TX
    6- RX
    7- CLOCK
    8- DATA
    9- GND MIC
    10- HF MIC
    11- AUDIO
    12- GND AUDIO


    Siemens S4 / S4 Power

    Secret Codes

    SP unlock *#0003*(secret code 8 digits)

    #*#06# for checking the IMEI (International Mobile Equipment Identity)

    MONITOR MODE

    The Siemens S4 series also haves a Monitor mode that can be activated directly from the standard user keypad. In order to activate this mode, you must enter the special access code currently programmed into the phone.

    TO ACTIVATE MONITOR MODE

    1. Menu
    2. 9 (Phone Options)
    3. 7 (Phone Status)
    4. Left Display Button (left MENU key)
    5. 76846666. HangUp Button (Red HandSet key)


    Now "Monitor" should appear at the bottom of the Network Options menu. Pressing the right Display Button when in monitor mode will show a list of the six cells with the strongest signals. Test Mode Indicators: (* = only available when call in progress )

    Unlock Siemens S4
    (For advanced users only)

    At addresses 0D8 to 0DD the phones code is stored. To read the code swap nibbles stored at addresses from 0DA to 0DD. Error counter is at 0D9. To clear the Phone Code write at addresses from 0D8 to 0DD: 00, 00, FF, FF, FF, FF.

    Pin Out

    1- GND
    2- SB
    3- POWER
    4- NC
    5- TX
    6- RX
    7- CLOCK
    8- DATA
    9- GND MIC
    10- HF MIC
    11- AUDIO
    12- GND AUDIO


    Siemens C 25

    Secret Codes

    *#0606# shows you Secret Code, but only without SIM Card.

    *#06# for checking the IMEI (International Mobile Equipment Identity)

    *#002# to kill divert

    Resets language to automatic selection : * # 0000 # then Green button

    **05*PUK1*PIN*PIN# gives you an option for changing your PIN1

    If you got the IMEI on your Display you can see the Version of you Mobile by pushing the Button just over the RED button.

    Pin Out (electrical connections)

    1- GND
    2- SB
    3- POWER
    4- NC
    5- TX
    6- RX
    7- CLOCK
    8- DATA
    9- GND MIC
    10- HF MIC
    11- AUDIO
    12- GND AUDIO


    Siemens S25, M35, S35, C35

    Secret Codes

    SP unlock *#0003*(secret code 8 digits)

    #*#0606# shows you a big Hexadecimal Code, but only without SIM Card.

    *#06# for checking the IMEI (International Mobile Equipment Identity)

    Resets language to automatic selection : * # 0000 # then Green button

    S25

    *#00(International prefix code of the country)# you get the language of that country (if supported) e.g.: *#0039# switches to Italian language, *#0044# or *#001# switches to English

    S35i

    Fullscreen for WAP

    Connected to the Internet, press twice right button (the one for recording) and all the status lines, one up of the screen and two on the bottom of the screen, WILL DISAPPEAR !!!! So, you can use the whole screen for browsing the internet !!! Press again the button the lines will appear.




    كودات وأسرار

    أسرار وخفايا فلبس

    Diga, Fizz, Genie, Spark, C12.أنواع الأجهزه هي :ـ


    Philips Diga

    Secrets codes

    Blocking list *#3333*#
    Time connected *#2558*#
    Flags,something *#3377*#
    Security code *#7489*#

    Service Provider Lock

    The Service provider (SP) lock is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

    SIM Card

    Attention: the Philips Diga has a credit card sized SIM-Card

    Philips Fizz

    Secrets codes

    IMEI code *#06#
    SW info *#8377*#
    Security code *#1234*#


    Service Provider Lock

    The Service provider (SP) lock is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

    Pin Outs

    1. GROUND
    2. GROUND
    3. HANDS FREE ON/OFF
    4. MUTE
    5. TX
    6. RX
    7. RTS
    8. REPROGRAMMING
    9. ON HOOK CHARGER (APPROX 13V? TO 14V)
    10. AUX MIC
    11. AUX SPEAKER
    12. GROUND

    Philips Genie

    Secrets codes

    *#06# IMEI number (International Mobile Equipment Identity)
    *#2254*# Status register: C, BS, RR, MMI, CREAT.
    *#2255*# activate and deactivate the "DEBUG CALL"-Mode; when activated, make a call to a busy line an the phone will disp some hex-codes on the disp.
    *#2558*# the time in days,hours and minutes you are connected to the net
    *#2562*# not clear; the phone reconnects to the net
    *#2565*# not clear; warmstart ?
    *#3333*# (NO) BLOCKING - list (15 items)
    *#2377*# "BEER": not clear, the phone waits a random time and reconnects to the net, sometimes the phone makes a reset or something
    *#3377*# Init, Flags, SIM LCK
    *#3353*# resets the (NO) BLOCKING - list
    *#7378*# Name, Length, SIM phase
    *#7489*# SECURITY CODE
    *#7693*# you can activate and deactivate the SLEEP MODE (when deactivated the battery will go down!)
    *#7787*# not clear: SPURIOUS INTERRUPT
    *#7948*# SWITCH OFF: not clear; it is a timer or something
    *#8463*# Some information about the SLEEP MODE: Wake, Sleep Req., Sleep

    Philips Genie (TCD838)

    Type *#2337*# and it will be activate the beep signal when the cellphone reconnected to the net.

    Service Provider Lock

    The Service provider (SP) lock is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

    Philips Spark

    Secrets codes

    IMEI code *#06#

    Service Provider Lock

    The Service provider (SP) lock is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

    Pin Outs

    1. GROUND
    2. GROUND
    3. HANDS FREE ON/OFF
    4. MUTE
    5. TX
    6. RX
    7. RTS
    8. REPROGRAMMING
    9. ON HOOK CHARGER (APPROX 13V? TO 14V)
    10. AUX MIC
    11. AUX SPEAKER
    12. GROUND

    Philips C12

    Secret Codes

    *#06# for checking the IMEI (International Mobile Equipment Identity)
    *#21# then phone say`s All calls deactivated
    *#43# then phone say`s All calls deactivated
    *#61# say`s either all calls deactivated or if you`ve got voicemail activated then it gives you info on it
    *#62# say`s either all calls deactivated or if you`ve got voicemail activated then it gives you info on it
    *#67# say`s either all calls deactivated or if you`ve got voicemail activated then it gives you info on it
    *#77# say`s either all calls deactivated or if you`ve got voicemail activated then it gives you info on it


    To send free SMS messages on a Philips C12. Type the message and choose to send. As the requesting text comes up hold down the power button and the message will be sent for free!Or you can send free SMS if you have no more talktime.

    Phonebook Position

    xx# - xx position in Phone Book (e.g. 09#, the number is saved on place 09)


    كودات وأسرار

    أسرار وخفايا ساجيم

    انواع الأجهزة التي يمكنك استخدام الكودات لها هي:ـ


    RC 815 PRO and MC959, MC820.


    Sagem RC 815 PRO

    Secret Codes

    *# Commands
    *#06# IMEI number
    *#30# followed by send - Corresp. ID incoming displayed
    *#31# followed by send - Your ID. outgoing displayed
    *#33# followed by send - Call barr inactive
    *#35# followed by send - Call barr inactive
    *#43# followed by send - Call Waiting
    *#100# followed by send - Your mobile number
    *#101# followed by send - DHLRU1 ?meaning?
    *#102# followed by send - Transmitter information
    *#103# followed by send - Current date and time
    *#147# followed by send - Last caller's number
    *#1345# followed by send - Call credit and service time left

    Hidden menu

    Engage one of the menus with the scroller then press *
    Appli menu: option 1 Version, option 1 Battery
    Prom menu: option 1 IMEI number
    Sim lock: option 1 Sim lock - press okay for 30 second countdown, C button to cancel (caution with this I don't know what happens when the counter reaches 0!!, it may lock up your telephone's SIM card.
    Network: option 1 Option not available
    Test LCD: option 1 Symbol 1 Tests screen, option 2 Symbol 2 Tests screen, option 3 Black Tests screen, option 4 For photo Tests screen, option 5 Tests the vibrator

    Sagem MC959, MC820

    Secret Codes

    MC959

    in main menu press * for hot-menu:

    lcd, led, vibra, tests, imei, software versions, battery voltage

    Type MENU - 5 - 1 - 1 - # to enter Engineering menu on SAGEM (RC-712, 721, 815 and 815 plus) phones.

    MC820

    Press * while in a menu; then you can view battery voltage, view IMEI number, Lock your SIM, and test your LCD screen with various function


    كودات وأسرار

    أسرار وخفايا سامسونج

    انواع الأجهزه التي يمكنك تطبيق الكودات بها هي :ـ


    SGH-600 and SGH-2100


    Samsung SGH-600 / SGH-2100

    Secret Codes

    *#06# -> Show IMEI
    *#9999# -> Show Software Version
    *#0837# -> Show Software Version (instructions)
    *#0001# -> Show Serial Parameters
    *#9125# -> Activates the smiley when charging.
    *#9998*228# -> Battery status (capacity, voltage, temperature)
    *#9998*246# -> Program status
    *#9998*289# -> Change Alarm Buzzer Frequency
    *#9998*324# -> Debug screens
    *#9998*364# -> Watchdog
    *#9998*377# -> EEPROM Error Stack - Use side keys to select values. Cancel and ok.
    *#9998*427# -> Trace Watchdog
    *#9998*523# -> Change LCD contrast - Only with version G60RL01W
    *#9998*544# -> Jig detect
    *#9998*636# -> Memory status
    *#9998*746# -> SIM File Size
    *#9998*778# -> SIM Service Table
    *#9998*785# -> RTK (Run Time Kernel) errors - if ok then phn is reset, info is put in memory error.
    *#9998*786# -> Run, Last UP, Last DOWN
    *#9998*837# -> Software Version
    *#9998*842# -> Test Vibrator - Flash the screenligth during 10 seconds and vibration activated.
    *#9998*862# -> Vocoder Reg - Normal, Earphone or carkit can be selected
    *#9998*872# -> Diag
    *#9998*947# -> Reset On Fatal Error
    *#9998*999# -> Last/Chk
    *#9998*9266# -> Yann debug screen (=Debug Screens?)
    *#9998*9999# -> Software version


    If the up Codes doesn't work, you should change *#9998* to *#0. i.e. *#9998*523# change to *#0523#. Another thing that will help is to remove your simcard.

    *0001*s*f*t# -> Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete)
    *0002*?# -> unknown
    *0003*?# -> unknown

    SP-unlock SGH-600 and SGH 2100

    *2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! ) But also changes IMEI to 447967-89-400044-0.

    *2767*2878# -> Custom EEEPROM Reset

    These codes has been tested with version FLD_2C6 G60SB03X of Samsung SGH-600



    كودات وأسرار

    أسرار وخفايا سوني

    انواع الأجهزه التي يمكنك تطبيق الكودات بها هي :ـ


    CMD-Z1, CMDX 1000 and C1.


    Sony CMD-Z1

    Secret Codes

    To view IMEI (International Mobile Equipment Identity) number enter *#06#
    Show Software version and manufact. date Following procedure will show on your phone the software version in first row of the display and some CPU and OS info on the second and third one. # 8377466 # (#version#)
    On earlier version the above tip may not work, but you can try this one:

    In the menu go to PHONE SETTINGS
    Jog down to: FACTORY SETTINGS and CLICK ONCE

    You will see a display "Factory Setting Yes No" . Don't do anything with this display, leave it as it is. Move the main switch of the phone briefly to the right (briefly means long enough to secure a short electric contact BUT short enough not to switch off the phone!) Now you key in the following sequence:

    # * 0 4 Will display info about sw (?)

    The Service provider (SP) lock

    is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

    Sony CMDX 1000

    Secret Codes

    Show Software date Following procedure will show on your phone the software date. Remove your SIM Card, then press:

    * # 06 #

    and finally press:

    [left softkey]

    To enter Monitor Mode on Network Option menu

    1. Menu 9 (Phone Options)
    2. 7 (Phone Status)
    3. [Left Display Button] (left MENU key)
    4. 7684666
    5. [HangUp Button] (Red HandSet key)

    The Service provider (SP) lock

    is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

    Developper Intro

    Press +12022243121 in the telephonebook in position "own number" and then "ok". Some fine graphics appears and disappears after a while, they say it is a greeting from the s.w. developpers. Enjoy it!

    Sony C 1

    The Service provider (SP) lock

    is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

    Remove SP lock

    (For advanced users only)Just edit your eeprom and at the address 16b-1D8 fill this address with 00.
    محمد سليمان
    محمد سليمان
    عضو جيد
    عضو جيد


    عدد المساهمات : 155
    نقاط : 231
    ضع تقييمك للمنتدى : 6
    تاريخ التسجيل : 10/07/2010
    العمر : 40
    الموقع : خط : بيت - شغل

    كودات وأسرار الموبايل Empty رد: كودات وأسرار الموبايل

    مُساهمة  محمد سليمان الخميس أغسطس 05, 2010 3:25 pm

    مشكور مافي شي للسامسونغ l700

      الوقت/التاريخ الآن هو الخميس مارس 28, 2024 2:53 pm